Ja om man bara ser utbildning som något som sker i skolbänken fy 87

From Mobile PC Wiki

Flag this photo

Samsung HDTVs are provided with specialized lamp units. Within the unit is some bulb that is illuminates the the television picture. The bulb has any limited life and will burn out. Whenever the bulb burns out, the image will be empty plus the lamp's LED will start to blink on the TV. The bulb can be replaced without calling a professional and it demands basic gear. Replacing the lamp will make sure a distinct and crisp image.

Difficulty: Moderately Easy

Instructions

Things You'll Need

Flathead screwdriver Replacement bulb

1 Turn the Tv away. Permit the television to cool for about 2 internet site minutes, if required. This should give the colling fan time to shut lower. Unplug the Television.

2 Uncover the lamp door on the rear of the television. On certain models, the door is found on the left side. The door is secured through four screws. Remove it using any flathead screwdriver plus pull off the door.

4 Slide the replacement bulb in the Tv. Do never to contact the goblet part of the bulb because the oil away from your palm will cause the bulb to come to be defective. Thrust the bulb in until you hear it click.

5 Replace the lamp cover door. Tighten each screw along with a screwdriver. Once the door yous reinstalled, the lamp remains prepared. Turn on the Tv and allow the lamp to warm increase to operation.

References

Fix Your DLP: Samsung Tv Owner's Guide DLPTV Review: Replacing a Television Bulb

tv control and tv 3 image by way of chrisharvey from Fotolia.com . hlr utbildning.